Wednesday, August 2, 2017

Learn How to Install Waterproof Membrane for Shower

Zac Ferry is sharing how to install a waterproof membrane for the shower. This seems detailed but if you have any DIY skills and some patience, you could save a lot of money. Thanks for the tips Zac.

In the arena of home improvement, there are tons of ideas available. Talking about the ideas related to bathroom improvement, the concept of waterproof membrane is catching up a lot of popularity. The waterproof membrane is being used widely these days not just in homes, but at commercial places as well, such as hospitals and offices. These membranes are effective and efficient in keeping away the menace of water leak. In addition, the membrane also adds to the longevity of the building.
In case you are wondering how to get waterproof membrane for shower installed, there is no need to worry about. All you need to do is known about a few important things that matter here. Let us focus at some of the major steps.

Installation Guide for Waterproof Membrane
  • First of all, you will have to figure out the materials that you will be needing for this purpose. You will have to arrange a roller, waterproof sealer, the membrane, preformed corners, and a hot air gun.
  • Now, carefully take a close look at the shower area, and make sure that no sharp objects are present there; for example, nails. If you come across any, get it removed before going ahead. After getting rid of the sharp objects, clean the surface on which you want to install the membrane.
  • Now, you need to apply the substrate material on the floor, and it should be done in a way to level the floor and the walls. Since the main purpose of a membrane is to prevent the accumulation of water, therefore you need to apply the substrate material in a way that the water easily slopes downward into the drain
  • In the next step, you need to apply the waterproofing membrane on the shower properly, and then cut it off. Next make use of the preformed corners to fix the waterproof membrane.
  • In the next step, you need to fix the membrane carefully to the corners of the shower, and it can be done with the help of the preformed corners which were already created. You need to place the membrane carefully in a way that the bonding between the walls and the membrane gets better. You can make use of the hot air gun to flatten the waterproof membrane.
  • Now, you need to apply the shower pan after checking the area thoroughly. In order to detect any leaks, you must clean the membrane first and then turn the water on until the floor fills up. Now, use a marker and spot the level of the water. After 24 hours, if the level of water has come down, it means there is a leak, and in that case, you need to apply one more layer of membrane.

So, those were the steps involved in the installation of waterproof membrane for shower. If you carry out the steps properly and carefully, you will not have to confront negative results. After you are confirmed that there is no leakage, all you need to do is add some adhesive to the membrane. Finally, use a sealer to seal the drain.

Without any doubt, waterproof membrane adds longevity to the floor of the bathroom region. You will not have to deal with issues like water leakage or damps after the process. If the bathroom area is too large or you are finding it tough to DIY, you can avail the help of professionals. There are plenty of options available in the web world. Compare the options like experience, reviews, and prices, and then choose your final option.

No comments:

Post a Comment